I am experiencing an I/O Error when xmodem C3500XL image to the flash this is my transcript.
I had to delete old IOS image on the flash because there was not enough space, then I made a mistake by rebooting the switch
since then I have been having trouble. I have tried instructions using Hyper terminal but without success , please advise.
This is a copy of what I was seeing, I can't also format the flash or even erase it either.
witch:
swétch:
swiôch:
switch: flash_init
Initializing Flash...
...The flash is already initialized.
switch: load_helper
switch: dir flash:
Directory of fìash:/
2 drwx 704 <date> html
4 -rwx 109 <date> énfo
5 -rwx 1811552 <date> c3500xl-c3h2s-mz.120-5.WC17.binconf
16 -rwx 109 <date> info.ver
17 -rwx 387 <datå> env_vars
19 -rwx 25 <date> snmpengineid
21 -rwx 676 <date> vlan.dat
22 -rwx 8694 <date> config.old
23 -rwx 1184 <date> config.text
366592 bytes available (3246080 bytes used)
switch: erase flash
Unknown cmd: erase
switch: copy xmodem: flash:
switch: copy xmodem: flash:
switch: copy xmodem: flash:
switch: copy xmodem: flash:c3500xl-c3h2s-mz.120-5.WC17.bin
Begin the Xmodem or Xmodem-1K transfer now...
CCCCCCCCCCBB0BB0xmodem:: I/O error
switch: