06-18-2001 02:17 PM - edited 03-01-2019 06:43 PM
Two Sites connected with a leased line (2Mbps). Site 1 has Internet access (512kbps) and both sites access to internet through that Internet access.
I want to reserve 128kbps for site 2 and 384kbps for site 1.
I mean , I want to make sure site 2 can have 128kbps for accessing the Internet through site 1.
Let's say Site 1 is Net 210.1.1.0 and site 2 is Net 210.1.2.0.
What would be the configuration for this?
Custom queueing only?
Please give some examples
06-19-2001 07:54 AM
you can put rate limit on the serial interfaqces of the router in site one and limit the bandwidth of that site.in the serial int connecting both sites enter this command. This will restrict the bandwidth of site 2 to 128k
rate-limit output 128000 10000 128000 conform-action transmit exceed-action drop
Rest bandwidth will be for your site 1.
Regards,
Ramesh
06-20-2001 07:10 AM
Thank you
But where do I specify this is only for Internet traffic. I mean, both sites interconnect with E1 link, but I want to make sure Site 2 have 128kbps out of 512kbps for Internet. (Site 1 has a 512k link to Internet)
I don´t want to restrict traffic between site 1 and 2.
Regards,
Marc
06-22-2001 03:50 AM
do you mean to say that site 1 and site two should have 2 mbps bandwidth ouyt of which site 2 should use only 128k for internet traffic?
Ramesh
06-22-2001 08:07 AM
I mean, site 1 and 2 have 2MBbs link.
But site 1 has an Internet link of 512kpbs.
Site 2 access Internet through site 1.
At peak hours, site 2 cannot access Internet because
site 1 users all are accessing Internet.
I want to reserve 25% of that link to users in site 2.
I think this should work:
queue-list 1 interface e0 1
queue-list 1 interface s0 2
queue-list 1 default 3
queue-list 1 queue 1 byte-count 4500
queue-list 1 queue 2 byte-count 1500
interface s1
custom-queue-list 1
s1: serial to Internet
s0: serial to site 2
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide