IOS upgrade problems using Cisco7206

[mmartel]

Hello:

I have a 7206 (NPE 200), it has 128 MBDRAM and 16MB flash PCMCIA running IOS ipplus 122.23. I need IOS 12.3.10 Service Provider. I tried to use copy tftp slot0, slot1 but these slots are not available when I use ATA PCMCIA, I burned IOS into a 48 MB ATA PCMCIA using copy tftp disk0 but when I reboot router the IOS does not work, router take IOS from bootflash

Please, could you tell me to solve this problem?

Thanks

[s.conway]

did you update the boot statement so the router would boot from slot0 and not flash

example

boot system flash slot0:c7200-js-mz.121-14.E5.bin

[mmartel]

Hello:

I configure

boot system disk0:c7200-p-mz.123.10a.BIN

but Router did not charge this IOS, Router used flashboot IOS

when I use slot0 or slot 1 It does not work too

Regards