07-02-2004 02:55 AM - edited 03-02-2019 04:47 PM
hello,
can anybody help?
i'll create a loopback interface on cisco WS-C2940-8TF-S
but the switch say:
(config)#interface loopback 0
^
% Invalid input detected at '^' marker.
why? is it not possible to create a loopb on the 2940?
tks for help.
Solved! Go to Solution.
07-02-2004 03:39 AM
Hello,
the 2940 is a Layer 2 switch only and does not support loopback interfaces (which are actually a Layer 3 functionality).
HTH,
GP
07-02-2004 03:39 AM
Hello,
the 2940 is a Layer 2 switch only and does not support loopback interfaces (which are actually a Layer 3 functionality).
HTH,
GP
12-20-2018 02:54 PM
I have on Cisco catalyst with WS-C2940-8TF-S with IOS Ver.12.1 (22)EA1 requires ver. c web interface
12-20-2018 02:47 PM
Hello! Update required Cisco Catalyst WS-C2940-8TF-S
12-20-2018 02:56 PM
I have on Cisco catalyst with WS-C2940-8TF-S with IOS Ver.12.1 (22)EA1 requires ver. c web interface
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide