04-26-2006 12:13 AM - edited 03-04-2019 03:02 AM
Hi
I have a Supervisor2 with 128MB/32MB DRAM/Flash and a MSFC2 with 128MB/32MB DRAM/Flash.
I like to convert the module to native IOS. Please tell me where I have to upgrade the DRAM to 256MB, only on the Supervisor or only on the MSFC or on both?
Regards
Peter
04-26-2006 12:19 AM
Hi Peter,
AFAIK you need to upgrade it on MSFC
Have a look at this link
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/12_1e/ol_2310.htm#wp253613
Also look at this link as how to upgrade DRAM on MSFC
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/cfgnotes/78_6953.htm
HTH, if yes please rate the post.
Ankur
04-26-2006 12:21 AM
Please upgrade both the Sup and MSFC. It is recommended to upgrade the both as generally the IOS images are very big size.
Please see the link below.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/12_1e/ol_2310.htm#wp253613
HTH, Please rate if it does.
-amit singh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide