Multicast on Cat6500

[bgerdts]

I have a Cat6500 (IOS = 12.1(13)E11) running multicast. "show ip mroute active" does not show all of the active multicast groups. "show ip mroute count" does not show increasing counts for the active multicast groups. Question - should the commands operate the same on this 6500 as they do on routers (7500s, etc) that are running multicast?

[didyap]

The show ip mroute active command displays all sources sending at a rate greater than or equal to 4 kbps. The output should be the same on the 6500 as the routers. For details on the command take a look at the command reference.

http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_command_reference_chapter09186a00801a7ee5.html#wp1073705