cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
292
Views
0
Helpful
1
Replies

NAT in L3

kuldeeprawat
Level 1
Level 1

HI,

I have L3 6506 in my network and 2590 l2 switch. I have 2 VLAN configured in L3.

VLAN name 50 and 60. In VLAN 50 I have one IGX (Wan Switch) and IP address is 172.16.50.54. There is no gateway configured in IGX.

From VlAN 60 I am not able to ping IGX because no gateway is configured in IGX.

I need to ping IGX from VLAN 60 Pls help me out. I have tried to do the NAT in L3.

Pls let me know how I NAT the IP in L3

1 Reply 1

smalkeric
Level 6
Level 6

check the following link for configuring intervlan routing between two vlans :

http://www.cisco.com/en/US/tech/tk389/tk815/technologies_configuration_example09186a008015f17a.shtml