03-13-2006 10:08 AM - edited 03-03-2019 02:15 AM
Sorry but I've looked and didn't see this question posted...Has anyone every NATed using a 3750 sw rel WS-C3750G-24TS 12.2(25)SEB4 C3750-IPBASE-M? I can do a sh ip nat trans or stat but trying to configure I thought it was just ip nat in global config but that didn't seem to work. Any suggestions?
Solved! Go to Solution.
03-13-2006 10:54 AM
Hi,
NAT is not supported on the 3750 platform. The "show ip nat translation" and "show ip nat statistics" is in the CLI, but unsupported.
This is documented here:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3750/12225see/scg/swuncli.htm#wp1031988
HTH,
Bobby
*Please rate helpful posts
03-13-2006 10:54 AM
Hi,
NAT is not supported on the 3750 platform. The "show ip nat translation" and "show ip nat statistics" is in the CLI, but unsupported.
This is documented here:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3750/12225see/scg/swuncli.htm#wp1031988
HTH,
Bobby
*Please rate helpful posts
03-13-2006 12:49 PM
Hi Bobby;
Thanks for the info
ThANKS
war
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: