Hi,
I would like to monitor the current TX Power (dBm) and RX Power (dBm) of the controllers Optics ports on my NCS.
Logs from my NCS.
show controllers optics 0/0/0/5 pm current 30 optics 1
Optics current bucket type : Valid
MIN AVG MAX Threshold TCA Threshold TCA
(min) (enable) (max) (enable)
LBC[% ] : 4.0 4.0 4.0 0.0 NO 0.0 NO
OPT[dBm] : -0.06 -0.04 -0.04 0.00 NO 0.00 NO
OPR[dBm] : -5.29 -5.27 -5.26 0.00 NO 0.00 NO
CD[ps/nm] : -251 -247 -244 -1 NO -1 NO
DGD[ps ] : 25.80 27.24 28.00 0.00 NO 0.00 NO
SOPMD[ps^2]: 176.00 272.70 347.00 0.00 NO 0.00 NO
OSNR[dB] : 30.00 30.00 30.00 0.00 NO 0.00 NO
PDL[dB] : 0.00 0.00 0.00 0.00 NO 0.00 NO
PCR[rad/s] : 0.00 0.01 0.05 0.00 NO 0.00 NO
------------------------------------------
show controllers optics 0/0/0/5 summary
TX Power RX Power
(dBm) (dBm)
----------- ----------
-0.04 -5.27
I have these MIBs / OID, but I don´t see the value that I'm looking for.
CISCO-OPTICAL-MIB / 1.3.6.1.4.1.9.9.828.0.1
RMON-MIB / 1.3.6.1.2.1.16.0
CISCO-ENTITY-SENSOR-MIB / 1.3.6.1.4.1.9.9.91
CISCO-OTN-IF-MIB / 1.3.6.1.4.1.9.9.639
IF-MIB::ifDescr.11 = STRING: Optics0/0/0/5
Device: cisco NCS-1002 / Cisco IOS XR Software, Version 6.1.2
I need some help with that.
Regards,