Netflow on ASR 1001-x + ntopng

nokoya001 · ‎02-03-2018

Hello Folks,

My Cisco ASR 1001-x running IPBASE 15.5(3)S6 and these are my settings

flow record test
  match ipv4 source address
  match ipv4 destination address
  match flow direction
  collect counter bytes long
  collect timestamp absolute first
  collect transport tcp flags
!
flow exporter test
  destination 192.168.0.2
  source GigabitEthernet0/0/1
  dscp 63
  transport udp 2055
!
flow monitor test
  exporter test
  record test
!
interface GigabitEthernet0/0/1
  description IP Transit to XXX
  ip address x.x.x.x
  ip flow monitor test input
  ip flow monitor test output
!
interface GigabitEthernet0/0/2
  ip address 192.168.0.1 255.255.255.0
  negotiation auto

ntopng shows one Netflow packet only.

Is there anything wrong with my configuration ?

Thanks