Hi,
We have a single network in our office. We plan to have 40 - 60 netwokrs in one place & we have 10 Br.offices in our company each network will have 126 hosts
Existing setup:
Router 3640
L3 Switch: 6509 in one bulding and other building is 6009. Both the switches are connected through fiber
and all the edge switch's are 4006 & 2000 Series
Question:
1. How to do the segmentation ?
2. Will L3 / L2 Switches handle 60 VLAN's ?
3. All IP Address are DHCP !!
How to configure using single DHCP Server
with 60 Vlan's ? That is all the 60 Segments are work with single DHCP Server.
4. PC's sharing should be done through Network adminstrator using access codes. User's should not be able to share any of the computers / Desktop's
5. All servers are in one segment with static address
5. Desktop's are in different , different VLAN's. All the desktop's should talk to server only. Servers can be sharable & ICMP is to be enabled for only servers & not for local segment PC's.
Can some one tell me how to do the segmentation?
How to configure L3 Switch / router ?
How to configure DHCP in the switch ?
Access permissions for the PC's through ACL ?
Regards
Sriram
