cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
647
Views
0
Helpful
2
Replies
tuannetworking90
Beginner

Network Topology Question

Hi everyone, I have a question about getting a full view of a customer's network topology

1) Sometimes I need to add SD-WAN to a customer's current traditional network.

2) But I found that I first need to understand about the customer's existing network topology, such as what are the devices, and which links they're connected together, then draw it out in draw.io

3) Some customers don't have the network topology diagrams ready, so I usually go in the devices to do CDP, MAC address and ports tracing which take a long time for me.

4) I hope to learn a more efficient way of doing this from you guys.

1 ACCEPTED SOLUTION

Accepted Solutions
marce1000
VIP Mentor

 

 - There are tools out there such as the one mentioned in the link below , but any solid network manager should have robust knowledge about the Intranet-network-layout :

                https://www.netformx.com/products/discovery/

 M.

View solution in original post

2 REPLIES 2
marce1000
VIP Mentor

 

 - There are tools out there such as the one mentioned in the link below , but any solid network manager should have robust knowledge about the Intranet-network-layout :

                https://www.netformx.com/products/discovery/

 M.

You're right, I'm still pretty new at this. Thanks for the response.