I'm buying a 7010 with (3) 7.5kw power supplies and am curious how others are physically plugging these in. These switches will be in a colocation data center that will only provide me with a total of (4) whips, either single or 3 phase, per cabinet. Would like to bring in dual 3 phase whips per cabinet and find a PDU that will step this down to single phase AND has (3) L6-30 recepticles.
Curious how others are connecting their 7k's that have the 7.5kw power supplies. Any input is appreciated.
Digital innovation is overwhelming the branch and WAN. More specifically, 80 percent of employees and customers work in or are served in branch offices*, which is leading to a 73 percent growth in mobile devices from 2014 to 2018**. The...
Purpose of the document
This document describes the general recommendations or best practices when designing and deploying the Cisco SD-Access technology. The document assumes that the reader has a general overview of Cisco's SD-Access ...
Dear All, When I use the show interface command on the Cisco Router ISR-4331, it will display as below information. The word that I mark red, it refresh every 5 seconds. But, I compare with the old router model like a Cisco 29XX or 28X...