cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
1489
Views
0
Helpful
1
Replies
Steve Chapman
Beginner

Prime 2.1 netflow from 2921

I used the built in design and deploy templates to apply OOTB Medianet - perfMon.  I see the configuration did apply to the router, but I am not seeing any netflow data to prime.  How do I troubleshoot/debug this issue.  

1 REPLY 1
Saurav Lodh
Rising star

ISR

15.1(3) T

TCP and UDP traffic, Voice & Video

To configure TCP and UDP traffic, use this CLI template:

Design > Feature Design > CLI Templates > System Templates - CLI > Collecting Traffic Statistics

To configure Voice & Video, use this CLI template:

Design > Feature Design > CLI Templates > System Templates - CLI >Medianet - PerfMon

ISR G2

15.2(1) T and 15.1(4)M

TCP and UDP traffic, application response time, Voice and Video

To configure TCP, UDP, and ART, see Configuring NetFlow on ISR Devices.

To configure Voice & Video, use this CLI template:

Design > Feature Design > CLI Templates > System Templates - CLI >Medianet - PerfMon

ISR G2

15.2(4) M2 or later, 15.3(1)T or later

TCP and UDP traffic, application response time, Voice and Video

To configure TCP, UDP, and ART, see Configuring Application Visibility.

ASR

15.3(1)S1 or later

TCP and UDP traffic, application response time, Voice & Video, HTTP URL visibility

ISR G3

15.3(2)S or later

Content for Community-Ad