02-11-2004 03:13 AM - edited 03-02-2019 01:31 PM
hello
i tried to download via xmodem, a software file to a cisco switch 2924MXL.
however it fails (xmodem I/O error).
it seems to be i haven't access to the flash: because when i tried to make a new folder (mkdir) the switch rely by "access denied". but i can delete the env_var file !
I wonder if i can change any variable to have full access to the flash? or is it the flash that is damaged?
thanks for your help
02-11-2004 10:39 AM
Issues with Xmodem can be wide spread. I'll give you some suggestions that I've seen solve these types fo problems in the past (you may have already tried these).
Don't know if you've seen this link:
Pretty good step by step for recovery on 2900XLs. See the section entitled "Recovering from Corrupted Software"
Other things you can try using:
-Different PC/laptop
-Different terminal emulation software program (hypertermial, etc)
-verify that the image being used is the correct file size, etc. May even want to try downloading a fresh copy of the image from Cisco.com.
If you are still having problems with the flash after trying the above, please reply back.
Hope this helps.
02-13-2004 11:06 PM
hello
i've tried all what you suggested but without success.
as i said, i think the problem is i don't have full access to the flash (R/W). i can't create a directory (mkdir).
do you suggest any other thing?
thanks for your help
02-14-2004 06:15 AM
Hello Oussama
Plz Try to use SecureCrt, I had the same problem last time.
Best regards
Kheireddine
02-16-2004 12:06 PM
Help from JOEBLOUGH !
joeblough
Feb 16, 2004, 10:44am PST
Simple solution...
The xmodem command outlined in Document ID: 12036 is ambiguous, or incorrect.
The noted command is:
switch: copy xmodem: Flash:filename
The command that worked on the 2900XL is:
switch: copy xmodem:filename flash:filename
02-17-2004 01:10 AM
hello joe
thank you very very very much for your help ;-)
every thing is ok now
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide