Hi!
I configured an IE300-Series-Switch to use an ntp server as time source and ptp to at as a boundary clock.
Syncing the internal clock to the NTP time works as expected, but the ptp clock stays completely out of sync.
So my question is how to sync the PTP clock with the intenal clock and/or the NTP time source.
IOS Version is 15.0(2)SE2 IES-LANBASEK9-M
ptp-test-cisco#sh ntp statu
Clock is synchronized, stratum 2, reference is 1.1.1.1
nominal freq is 119.2092 Hz, actual freq is 119.2078 Hz, precision is 2**17
reference time is D569ACF8.27490A93 (15:42:48.153 UTC Mon Jun 17 2013)
clock offset is -0.1309 msec, root delay is 0.91 msec
root dispersion is 17.79 msec, peer dispersion is 10.86 msec
loopfilter state is 'CTRL' (Normal Controlled Loop), drift is 0.000011974 s/s
system poll interval is 512, last update was 402 sec ago.
ptp-test-cisco#sh ptp cl
PTP CLOCK INFO
PTP Device Type: Boundary clock
Clock Identity: 0x2C:3F:38:FF:FE:4:D:80
Clock Domain: 0
Number of PTP ports: 10
Priority1: 128
Priority2: 128
Clock Quality:
Class: 248
Accuracy: Unknown
Offset (log variance): N/A
Offset From Master: 0
Mean Path Delay: 0
Steps Removed: 0
Local clock time: 23:57:00 UTC Mar 13 1993
ptp-test-cisco#sh clock
15:50:01.058 UTC Mon Jun 17 2013