03-23-2020 09:10 PM
I have the following router model at HQ & branches, thinking to implement QOS which the tunnel in VLAN trunk mode.
Question:
Solved! Go to Solution.
04-02-2020 08:24 AM
04-03-2020 06:10 AM
03-24-2020 01:22 AM
These info-resources indicate that it is possible and or provide some examples :
https://community.cisco.com/t5/routing/traffic-policing-question-on-cisco-asr-1001/td-p/2507605
https://community.cisco.com/t5/routing/4321-qos-question/td-p/2908560
https://community.cisco.com/t5/routing/qos-and-routers/td-p/2994532
M.
04-02-2020 02:45 AM
My main purposes is to limit someone to push huge data from HQ to branches. It will congest the traffic and cause slowness for other systems. I am thinking to set the QOS at HQ router or branches router? I wish to limit the server IP address. What is the best way to achieve?
HQ line = 70mpbs
more than 50 Branches and each line = 6mpbs
04-02-2020 08:24 AM
03-24-2020 11:33 AM
04-02-2020 09:36 PM
Hi Joseph,
With the requirements below.
Question:
1. Server administrator push the huge size ( assume 2 GB size) Windows patches from HQ (70mpbs) to branches (6mpbs) during production hours and caused the link congestion. I want prioritize the bandwidth for other systems in the branches since the windows patches is not first priority.
2. Server administrator could push the Windows patches to single branch or multiple branches which not under our control. Push from HQ no issues but it will be caused slowness at branches which only have 6mpbs bandwidth.
04-03-2020 06:10 AM
04-07-2020 03:00 AM
Hi Joseph,
I have the idea now. Let's try and see the result!
Question:
1. Shaping is required for this kind of Scenario? I have to create a child class priority or bandwidth on the top on it attach to parent class-default shaping.
04-07-2020 10:55 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide