Hi,
I am using NMS 4th Edition. We have cat 6513. When I am chacking these Cat6513, it's show's all modules fine, only for WS-X6381-IDS module, it's show's that "UNSUPPORTD CARD".
The version and modules detail is as follow:
CC-CORE-6513#sh ver
Cisco Internetwork Operating System Software
IOS (tm) c6sup2_rp Software (c6sup2_rp-JSV-M), Version 12.1(11b)E3, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Thu 09-May-02 06:06 by hqluong
Image text-base: 0x40008980, data-base: 0x4181A000
ROM: System Bootstrap, Version 12.1(4r)E, RELEASE SOFTWARE (fc1)
BOOTLDR: c6sup2_rp Software (c6sup2_rp-JSV-M), Version 12.1(11b)E3, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
CC-CORE-6513 uptime is 1 week, 2 days, 1 hour, 15 minutes
System returned to ROM by power-on (SP by power-on)
System image file is "bootflash:c6sup22-jsv-mz.121-11b.E3"
cisco Catalyst 6000 (R7000) processor with 227328K/34816K bytes of memory.
Processor board ID SAL06110ZNZ
R7000 CPU at 300Mhz, Implementation 39, Rev 3.3, 256KB L2, 1024KB L3 Cache
Last reset from power-on
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
1 Virtual Ethernet/IEEE 802.3 interface(s)
48 FastEthernet/IEEE 802.3 interface(s)
38 Gigabit Ethernet/IEEE 802.3 interface(s)
381K bytes of non-volatile configuration memory.
16384K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102
CC-CORE-6513# sh mod
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 2 Catalyst 6000 supervisor 2 (Active) WS-X6K-S2U-MSFC2 SAL061112RL
2 2 Catalyst 6000 supervisor 2 (Standby) WS-X6K-S2U-MSFC2 SAL061112QP
3 48 48 port 10/100 mb RJ45 WS-X6348-RJ-45 SAL0606HSV4
6 2 Intrusion Detection System WS-X6381-IDS SAD061204VA
7 0 Switching Fabric Module-136 (Active) WS-X6500-SFM2 SAD0603051X
9 16 Pure SFM-mode 16 port 1000mb GBIC WS-X6816-GBIC SAL061218PE
10 16 Pure SFM-mode 16 port 1000mb GBIC WS-X6816-GBIC SAL061420DA
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
1 0006.d65a.9e54 to 0006.d65a.9e55 3.5 6.1(3) 7.2(0.35) Ok
2 0005.7485.9124 to 0005.7485.9125 3.5 6.1(3) 7.2(0.35) Ok
3 0008.207e.3dd4 to 0008.207e.3e03 6.0 5.4(2) 7.2(0.35) Ok
6 0002.fce1.3a3c to 0002.fce1.3a3d 1.2 4B4LZ0XA 2.5(1) Ok
7 0001.0002.0003 to 0001.0002.0003 1.1 6.1(3) 7.2(0.35) Ok
9 0009.11e0.4750 to 0009.11e0.475f 1.3 12.1(5r) 12.1(11b) Ok
10 0009.11e0.4574 to 0009.11e0.4583 1.3 12.1(5r) 12.1(11b) Ok
Mod Sub-Module Model Serial Hw Status
--- --------------------------- --------------- --------------- ------- -------
1 Policy Feature Card 2 WS-F6K-PFC2 SAL06111224 3.2 Ok
1 Cat6k MSFC 2 daughterboard WS-F6K-MSFC2 SAL06110ZNZ 2.2 Ok
2 Cat6k MSFC 2 daughterboard WS-F6K-MSFC2 SAL06110ZS1 2.2 Ok
9 Distributed Forwarding Card WS-F6K-DFC SAL06162PTS 2.2 Ok
10 Distributed Forwarding Card WS-F6K-DFC SAL06162PUX 2.2 Ok
Please help me..
