10-06-2021 06:44 AM
Hello Community
I need to have internet access on my remote sites to monitor the power supply (a cloud based solution only),the remote site are in a rural city with no internet connexion
the idea is to have a remote internet access from the hub Router to remote routers using a public address IP (102.220.17.5/24)
BR.
Solved! Go to Solution.
10-07-2021 06:05 AM - edited 10-07-2021 06:10 AM
Hi,
If for example this is the configuration in ISR4331 HUB:
interface GigabitEthernet0 / 0
ip address 102.220.17.5 255.255.255.0
description WAN
ip nat outside
!
interface GigabitEthernet0 / 1
description LAN
ip address 192.168.2.1 255.255.255.0
ip nat inside
!
port-forwarding
in this example client trying to connect to 102.220.17.5:3389 then it will be redirected to a server at 192.168.2.3:3389:
ip nat inside source static tcp 192.168.2.3 3389 102.220.17.5 3389
PAT
In case you want to create connection from 192.168.2.3 to behind the ISR4331 HUB:
ip nat inside source list 100 interface GigabitEthernet0/0 overload
access-list 100 permit 192.168.2.3 0.0.0.0
10-07-2021 06:05 AM - edited 10-07-2021 06:10 AM
Hi,
If for example this is the configuration in ISR4331 HUB:
interface GigabitEthernet0 / 0
ip address 102.220.17.5 255.255.255.0
description WAN
ip nat outside
!
interface GigabitEthernet0 / 1
description LAN
ip address 192.168.2.1 255.255.255.0
ip nat inside
!
port-forwarding
in this example client trying to connect to 102.220.17.5:3389 then it will be redirected to a server at 192.168.2.3:3389:
ip nat inside source static tcp 192.168.2.3 3389 102.220.17.5 3389
PAT
In case you want to create connection from 192.168.2.3 to behind the ISR4331 HUB:
ip nat inside source list 100 interface GigabitEthernet0/0 overload
access-list 100 permit 192.168.2.3 0.0.0.0
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: