cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
183
Views
0
Helpful
3
Replies
fhoban
Beginner

route redistribution with isis/eigrp

Can someone please tell me what is the correct way to add the 'delay ' factor into route resdistribution. eg. If the delay is 100 or 5 or 8 ms what is the correct way to add it in.

e.g.Bandwidth = 64kbps

Delay = 100 / 5 / 8MS (any of these)

Reliability = 255

Load = 1

MTU = 1500

#redistribute isis level-1 metric 64 100 255 1 1500

Is it just put in as follows in mseconds 100 or 5 or 8

Thanks for your help

3 REPLIES 3
fhoban
Beginner

Surely someone has a clue ??

ruwhite
Rising star

Generally, we don't try and figure out what to set the dealy at to "mimic" the redistributed protocol's delay. Instead, we just pick a delay that seems "right," and use that. Note there's no way to actually change the delay base don the inbound metric at this point, though we've talked about doing that in the past.

:-)

Russ.W

tks for the reply