cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1326
Views
0
Helpful
1
Replies

Route Reflector redundancy

Darlington Moyo
Level 1
Level 1

graphics/15fig33.gif

In such a scenario where a commmon cluster-id is configured on the two RRs (R1,R2) is the iBGP session between the RRs required and if so why ?

1 Reply 1

manmp
Cisco Employee
Cisco Employee

Hi Darlington,

It is there in the below link:

http://cisco.iphelp.ru/faq/5/ch15lev2sec17.html

It is nothing but to provide redundancy if the R8 to R2 link goes down, R2 will not be able to reach R8.

Thanks,

Manjunath