I have a big problem that hope someone can get me a answer on.
Our network is small one only one SBS 2003 server and a 1841 vpn router, its configured to give VPN user a IP number from a internal pool with different ip range from the local network.
Server is configured with wizard to use only one network card and ip inside the local network.
User has no problem to logon with laptop and work with shared map and exchange email, but when they tray to open IE and access local companyweb on the server it dont get access.
If I tracert the host from a connected computer through vpn tunnel I get this result.
C:\Documents and Settings>tracert companyweb
Tracing route to se-gte-server01.domain.local [10.252.52.10]
over a maximum of 30 hops:
1 12 ms 14 ms 13 ms xx.xx.xx.178
2 13 ms 13 ms 13 ms 10.252.52.10
and thats looks okay
Have you tried making a telnet on port 80, from the laptops?
telnet 10.252.52.10 80
If it works, you will get alot of weird looking output from the server, kind a like this:
HTTP/1.1 400 Bad Request.
Now try the same from a PC directly on the same network as the SBS (Not VPN tunnel).
Are the results the same?