01-18-2013 12:33 AM - edited 03-03-2019 06:55 AM
Can we find out if a flow is using tcp or udp using "sh ip cache flow" command? what do 06 and 11 indicate here?
Routert#sh ip cache flow
Te3/4 10.2.1.1 Vl52 1.1.1.1 06 8389 0017 48
Vl59 192.168.1.1 Te3/4 10.2.2.2 11 007B 007B 0
Solved! Go to Solution.
01-18-2013 07:16 AM
Hi,
these are the hex values for the upper layer protocol : so 6 in hex is 6 in dec and 11 in hex is 17 in dec
as you'll see here 6= tcp and 17= udp
http://www.iana.org/assignments/protocol-numbers/protocol-numbers.xml
Regards.
Alain
Don't forget to rate helpful posts.
01-18-2013 07:16 AM
Hi,
these are the hex values for the upper layer protocol : so 6 in hex is 6 in dec and 11 in hex is 17 in dec
as you'll see here 6= tcp and 17= udp
http://www.iana.org/assignments/protocol-numbers/protocol-numbers.xml
Regards.
Alain
Don't forget to rate helpful posts.
01-20-2013 07:08 AM
Thanks Alain...Rated as 5.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide