cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
120688
Views
15
Helpful
4
Replies
adam.strobel
Beginner

show time and date on c2600

Can you show the time/date on a cisco 2600? this is what I have configured.

clock timezone EST -5

clock calendar-valid

1 ACCEPTED SOLUTION

Accepted Solutions

Use clock set command.

View solution in original post

4 REPLIES 4
Prashanth Krishnappa
Cisco Employee

You can do a "show clock"

If it is the wrong time and day, how do you change it?

Use clock set command.

"clock set" or you can configure Network Time Protocol (NTP) on the device.

http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1835/products_configuration_guide_chapter09186a008030c799.html#wp1001170

Hope this helps,

Harold Ritter
Sr Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México
Paseo de la Reforma 222
Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México