08-21-2004 12:03 AM - edited 03-02-2019 05:54 PM
Hi,
I want to know whether Cat3550 supports DLSW or not?
I can't find document on the Cisco.com.
08-22-2004 11:03 PM
Hi,
Even i couldn`t find anything about DLSw on 3550. But 6500 with sup2/msfc2 will support it and here is the FAQ for this :
http://www.cisco.com/en/US/tech/tk331/tk336/technologies_q_and_a_item09186a00800949ff.shtml
DLSw+ support matrix
http://www.cisco.com/en/US/tech/tk331/tk336/technologies_design_guide09186a008011a67f.shtml
As far as I read about it I dont think it is supported on 3550.
Regards
Aashish
02-19-2018 09:22 AM
Change encapsulation to PPP, and you can use preditor now. 8. Dlsw (3) Bridge connectivity between ring10 and ring20, ring10's host ...... 1. config terminal server: R1-R6,Cat3550 2. draw network topology map. Update as soon as there are changes.
the Cat3550 switches. These are explained ..... Found predominantly in Ethernet environments, the operation of a Transparent Bridge is transparent to the network end-devices .... DLSw Lite (also known as LLC2 or Frame Relay encapsulation) - This method supports many DLSw+ features in Cat3550
02-28-2018 07:18 PM
DLSw is not supported on the Supervisor Cat3550 III/IV. For networks with SNA and IP protocols, you can route the IP traffic on Catalyst 4000 Supervisor III/IV and bridge the SNA traffic with DLSw switching on Cisco IOS software on an external route.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide