06-06-2006 03:16 AM - edited 03-03-2019 03:31 AM
Is it possible for me to summarize my networks 192.168.11.0, 192.168.12.0, 192.168.13.0 ? into 1 eigrp statement, can I advertise them as the 192.168.0.0 network ? would this advertise each class c network out though ?
06-06-2006 03:21 AM
yes, you could advertise 192.168.0.0/16 via eigrp.
this advertise all three networks you are talking of.
this could be manually summarized to 192.168.0.0/21
06-06-2006 03:28 AM
but would this not be advertising the /16 network ? I have other sites already on this !!
06-06-2006 03:46 AM
Hello Carl,
192.168.11.0, 192.168.12.0, 192.168.13.0
there's no way to aggregate these routes in a single stamement without including other subnets.
The best you can do is:
192.168.11.0/24
192.168.12.0/23
HTH,
if it does, remember to rate this post.
Vlad
06-07-2006 06:37 PM
The best single aggregate you could use would be:
192.168.8.0/21
which would include the following range of addresses:
192.168.8.0 - 192.168.15.255
Let me know if this helps by rating the post.
Michael
06-07-2006 06:45 PM
But that would be too inclusive and could create routing issues, if 192.168.15.0/24 is on a different part of the network for instance.
Vlad
06-08-2006 03:54 PM
Absolutely, but it is the only way I can see to meet the original requirement.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: