06-25-2015 02:42 AM - edited 03-03-2019 07:54 AM
Hi Community,
I need to decode a "show stacks " output. While doing some research and reading AFROJ AHMAD statement in post (Getting High CPU S720 due SNMP Prime) i figured out that i need to find some "symbols.gz" files for the corresponding IOS version.
Also this link http://www.cisco.com/c/en/us/td/docs/routers/7600/Hardware/Hardware_Guides/Supervisor_Engine_and_Route_Switch_Processor_Guide/76-sup-rsp/Troubleshooting.html#wp1112254 is referring to some ....symbols.gz.
Question: Where do i get those files?
Hope you can help.
Best regards
Philipp
Solved! Go to Solution.
06-26-2015 01:36 PM
Phillipp,
Those symbolz.gz files are used in TAC troubleshooting / decoding and not, as far as I know, made publicly available.
If you need to decode the output you mention, please open a TAC case.
06-26-2015 01:36 PM
Phillipp,
Those symbolz.gz files are used in TAC troubleshooting / decoding and not, as far as I know, made publicly available.
If you need to decode the output you mention, please open a TAC case.
06-29-2015 04:57 AM
Thanks for the update. I already guessed something like that.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: