Hi,
I have a Point-to-Point Vsat between main and branch office. Two Sub-interfaces are configured per router: TX & RX. I need to create a tunnel interface between the two routers, the problem is that teh tunnel Source on one router should be the tunnel destination on the other ans Visa versa. but in my case they r different:
Router A
----------
Interface S0/0.1
describtion "TX"
ip address 10.0.1.1 255.255.255.252
frame-relay interface-dlci 20
Interface S0/0.2
describtion "RX"
ip address 10.0.1.5 255.255.255.252
frame-relay interface-dlce 220
Router B
--------
Interface S0/0.1
des "TX"
Ip address 10.0.1.6 255.255.255.252
frame-relay interface-dlce 220
Interface S0/0.2
des "RX"
Ip address 10.0.1.2 255.255.255.252
frame-relay interface-dlce 20
thx
