I´m trying to desing a high Availability topology with two 4500, in this moment the company a 4500R-E with a supervisor 6e, and we are considering a second switch 4500R+E with supervisor 7E, is possible to interconnect both switch in high Availability with GLBP? and if is possible how is the connection between both supervisors?
I´m trying to desing a high Availability topology with two 4500, in this moment the company a 4500R-E with a supervisor 6e, and we are considering a second switch 4500R+E with supervisor 7E, is possible to interconnect both switch in high Availability with GLBP?
Hmmm ... Not easy.
Had your statement be that you currently have 4500R+E with Sup7E and you want to add another 4500R+E with Sup7E then my answer would be "It's possible".
Sup7E will have VSS feature sometime end of this year to mid-next year. VSS will NOT be supported on the Sup6E.
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
GLBP I believe is supported on 4500 L3 sups.
How to interconnect them depends on what you're trying to accomplish. Since you want to use GLBP, you'll need an uplink to both 4500s from an edge switch. There are several ways to provide redundancy.
If you intend to span VLAN beyond a single edge switch, you'll want to sync your ARP and MAC-table timers to avoid unicast flooding.
The 2020 IT Blog Awards, hosted by Cisco, is now open for submissions through October 16. Submit your blog, vlog or podcast today. For more information, including category details, the process, past winners and FAQs, check out: https://www.cisco...
Hello,We have a pair of N3K-3064PQ-10GX and one of them acting as backup and we want to migrate from VyOS to it, we want to add 500x interface vlan and each interface vlan has its own ip/prefixes (for example /30 /29 ...) and we ahve 6-8x BGP session with...
We live in an age that is both thrilling and evolving substantially. A new trend/technology is always on rise even before the preceding has been used to its fullest potential. Although the concepts of digital transformation may seem over discussed, ...
Show CommandPurposeCiscoICX-RuckusShow Spanning tree infoShow spanning-treeshow 802-1wVerify Port-Channel / Link aggregation infosh lag briefsh etherchannel summaryShow CDC/LDP neighbor infoshow cdp neighbors detailsh lldp neighbors de sh mac a...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.