Unequal load balancing EIGRP...any ideas?

[bbravo]

What would be the more efficient way to implement a back up solution for this:

DS3 point-to-point with a t1 frame backup

They 2 different routers and both circuits terminate in the same remote router, routing protocol is EIGRP, any ideas are greatly appreciated.

[Georg Pauwen]

Hello,

with EIGRP you can configure unequal cost path load balancing using the VARIANCE command, here is a link to how to configure this:

http://www.cisco.com/en/US/partner/tech/tk365/tk207/technologies_tech_note09186a008009437d.shtml

Regards,

Georg

[bbravo]

Thanks