04-05-2004 07:13 AM - edited 03-02-2019 02:47 PM
It's said that 3640A does not suport this kind of VIC. Can anybody give me a suggestion? Thanks in advance!
04-06-2004 11:59 PM
Hi Hao,
I don't see any difference between 3640A and 3640 please see below their description.
CISCO3640A=> Cisco 3600 4-slot Modular router-AC with IP Software
CISCO3640=> 3640 with AC power supply
Minimum Supported Software Release(s) per release train on VIC-2BRI-S/T-TE
12.0(2)XD, 12.0(3)T, 12.0(5)XK, 12.0(7)T, 12.0(7)XK, 12.1(1)T, 12.1(1), 12.1(5)YB, 12.1(5)YD, 12.2(1), 12.2(2)T, 12.2(2)XT, 12.2(11)YT, 12.2(15)ZJ, 12.3(1), 12.3(2)T
You can check the above information by accessing this link.
Software Advisor
http://www.cisco.com/cgi-bin/front.x/Support/HWSWmatrix/hwswmatrix.cgi
You may also refer to these links for your reference.
Understanding ISDN BRI Voice Interface Cards
http://www.cisco.com/en/US/products/hw/modules/ps2641/products_tech_note09186a0080111b16.shtml
Cisco 3600 Series Multifunction Platforms (3620 and 3640/3640A)
http://www.cisco.com/en/US/products/hw/routers/ps274/products_data_sheet09186a0080091f6f.html
I hope I was able to provide you the information that you need. :-)
Best Regards,
Ansley R. Verzosa
04-07-2004 01:19 AM
Hi Ansley,
Thank you so much for your kind help!
After checking some related documents, I found that the my question posted here is meaningless. The fact is that my customer has a NM-HD-2V on his 3640A router. But he inserted VIC-2BRI-S/T-TE in to the NM-HD-2V and the problem was that the vic couldn't be recognized.
Actually, at present, VIC-2BRI-S/T-TE only supports two kinds of NMs including NM-1V and NM-2V. So it's the reason of asking such a question.
Anyway, thank you again.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: