VIC-2BRI-S/T-TE compatible with 3640A?

[zhang-hao]

It's said that 3640A does not suport this kind of VIC. Can anybody give me a suggestion? Thanks in advance!

[averzosa]

Hi Hao,

I don't see any difference between 3640A and 3640 please see below their description.

CISCO3640A=> Cisco 3600 4-slot Modular router-AC with IP Software

CISCO3640=> 3640 with AC power supply

Minimum Supported Software Release(s) per release train on VIC-2BRI-S/T-TE

12.0(2)XD, 12.0(3)T, 12.0(5)XK, 12.0(7)T, 12.0(7)XK, 12.1(1)T, 12.1(1), 12.1(5)YB, 12.1(5)YD, 12.2(1), 12.2(2)T, 12.2(2)XT, 12.2(11)YT, 12.2(15)ZJ, 12.3(1), 12.3(2)T

You can check the above information by accessing this link.

Software Advisor

http://www.cisco.com/cgi-bin/front.x/Support/HWSWmatrix/hwswmatrix.cgi

You may also refer to these links for your reference.

Understanding ISDN BRI Voice Interface Cards

http://www.cisco.com/en/US/products/hw/modules/ps2641/products_tech_note09186a0080111b16.shtml

Cisco 3600 Series Multifunction Platforms (3620 and 3640/3640A)

http://www.cisco.com/en/US/products/hw/routers/ps274/products_data_sheet09186a0080091f6f.html

I hope I was able to provide you the information that you need. :-)

Best Regards,

Ansley R. Verzosa

[zhang-hao]

Hi Ansley,

Thank you so much for your kind help!

After checking some related documents, I found that the my question posted here is meaningless. The fact is that my customer has a NM-HD-2V on his 3640A router. But he inserted VIC-2BRI-S/T-TE in to the NM-HD-2V and the problem was that the vic couldn't be recognized.

Actually, at present, VIC-2BRI-S/T-TE only supports two kinds of NMs including NM-1V and NM-2V. So it's the reason of asking such a question.

Anyway, thank you again.