cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
408
Views
0
Helpful
3
Replies
cadams
Beginner

VTP Pruning Propagation

I have two 6509's both setup as VTP servers. I want to enable pruning on the entire VTP domain. Do I need to enable pruning on both 6509 servers or only one of them? Does that information propagate throughout the VTP domain?

3 REPLIES 3
dfelter
Beginner

Enabling VTP pruning on one VTP server enables it for the entire VTP domain

the cisco recommends automatic pruning vtp on VTP server?

maxrafael
Beginner

VTP Pruning Mode                : Disabled (Operationally Disabled)
VTP V2 Mode                     : Enabled
VTP Traps Generation            : Disabled
MD5 digest                      : 0xFB 0x70 0x4A 0x1A 0x46 0xE3 0xD7 0xE9 
Configuration last modified by 127.0.0.70 at 7-14-15 15:25:50
Local updater ID is 127.0.0.70 on interface EO0/2 (first interface found)
VTP version running             : 2
#
#conf t            
Enter configuration commands, one per line.  End with CNTL/Z.
#vtp pr 
####(config)#vtp pruning ?
????