08-27-2002 09:49 AM - last edited on 03-25-2019 02:41 PM by ciscomoderator
I have two 6509's both setup as VTP servers. I want to enable pruning on the entire VTP domain. Do I need to enable pruning on both 6509 servers or only one of them? Does that information propagate throughout the VTP domain?
08-27-2002 11:37 AM
Enabling VTP pruning on one VTP server enables it for the entire VTP domain
07-15-2015 10:52 AM
the cisco recommends automatic pruning vtp on VTP server?
07-15-2015 10:56 AM
VTP Pruning Mode : Disabled (Operationally Disabled)
VTP V2 Mode : Enabled
VTP Traps Generation : Disabled
MD5 digest : 0xFB 0x70 0x4A 0x1A 0x46 0xE3 0xD7 0xE9
Configuration last modified by 127.0.0.70 at 7-14-15 15:25:50
Local updater ID is 127.0.0.70 on interface EO0/2 (first interface found)
VTP version running : 2
#
#conf t
Enter configuration commands, one per line. End with CNTL/Z.
#vtp pr
####(config)#vtp pruning ?
????
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: