09-04-2005 02:36 AM - edited 03-02-2019 11:55 PM
09-04-2005 02:43 AM
Hi N,
Hit the keys (Ctrl + Shift + 6) together and then hit x alphabet
It will surely work.
HTH
Ankur
09-04-2005 02:46 AM
thanks for that Ankur. Where in the world did Cisco decide on that for an abort sequence!
09-04-2005 02:53 AM
that didn't work
09-04-2005 02:59 AM
Hi N,
It should work can you try (Ctrl + shift + 6) together or press ctrl keep holding it then press shift keep holding both and then press 6.
Should work, I checked again.
Regards,
Ankur
09-04-2005 03:19 AM
I'v egot it to work but don't ask how! it's a case of continually pressing all four buttons until the trace stops.
Thanks Ankur for your help.
09-04-2005 03:21 AM
It's the same sequence that breaks you from a connection, you should be able to easily do it with practice(and you will get lots of practice telneting into your various routers and switches).
The 6 is not necessary, it will drop you out of the traceroute or ping seqence without it.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: