Wher can I find information to configure ATM using AIM-ATM-4E1 on a 2621XM?

[juergenott]

Within Wireless LAN were using ATM as transport network between 2621XM hotspot router and the SSG. In the past we used NM-4E1 on 2621XM. Due to EOS we needed to use AIM-ATM-4E1 now. The configuration of the new ATM interface card is different from NM-4E1. Where can I find information how to configure AIM-ATM-4E1 on 2621XM for ATM (PVC and IMA)?

[s.conway]

This is a link to some basic ATM configuration on the 2600. Includes PVC SVC IMA etc.

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/cis3700/sw_conf/37_swcf/swcfgfmx.htm#999843

[juergenott]

Problem has been resolved in the mean time. Information was provided by Cisco SE to whom the info request was sent in parallel.