ASA 5510 with windows VPN

[Ma'moun Mohammad shanableh]

Dear all,

i have upgraded a PIX 525 lately to a 5510 ASA, but i have faced a problem after this.

One of the DMZ's are connected to a switch that is not connected to my VTP domain on a DMZ port.

and iam natting one of the servers as below:

nat(DMZ) 1 x.x.x.x

global (outside) x.x.x.x

----------------------------------------

static (DMZ,outside) x.x.x.x x.x.x.x

with access-list to permit from host to host with all ports opened.

my problem is that the outside client is able to initiate a windows VPN to a server that i have in the DMZ, BUT it disconnects after almost 10minutes.

any ideas of what might be the reason of the disconnection.

Note, a cisco remote access VPN is also configured on the FW, and it doesnt disconnect.

thanx in advance.                

[Javier Portuguez]

Hi,

What type of VPN client?

Does the client disconnect the VPN session or the connection to the server?

Does it come up with any specific error (on the client side)?

How many users affected? All from the same location?

Thanks.

Portu.