ASA with ipsec NAT

[vinoth13.c]

 I have configured ipsec site to site between ASAS ..

Nat is configured on both end .. phase 1 is up and phase2 is not ..

There is something in the NAT , I have done correctly still phase 2 is not up , could you please find out ..

i have attached both the ASA configuration .

while configuring access-list   for source or destination need to add real ip or natted ip ?

thanks

[vinoth13.c]

I found the problem , problem is an ACL , 

i have configured below format on the both end.

access-list xxx extended permit ip object NATTED_IP object Real_ip ..

thanks