Other Security Subjects

i have a reverse proxy server that is publising two different sites. How can I static map two public addresses to one internal address?PIX 515EThanks

I have a 2621xm K9 bundle with 12.2(8)T4 running inspect, nat, vpn, ospfSystem was installed and configured and working for 4 hours then stopped. when I look at the inspect sessions all the static nat sessions are shown as half open sessions and I ca...

I have captured the following packet on the network using tcpdump tool:02:22:18.726507 0:3:e3:d9:26:c0 0:0:c:4:b2:33 0800 60: IP my.net.38.167 > my.net.38.167: igmp query v2 [gaddr 240.0.3.146] 4500 001c 0000 0000 2f02 37d8 cfa6 26a7 cfa6 26a7 1164...

Hi!Is MSFC required if CatOS is run on the Supervisor?According to docs FWSM runs its own routing and from FWSM point of viewMSFC is just an external router. Right? So, can external router be used insteadof MSFC?Oleg Tipisov,REDCENTER,Moscow

Hi -Trying to cost-effectively deploy a Cisco VPN client-to-concentrator connection for an unattended Win2K workstation. Problem is, being unattended, there's no way to manually initiate the connection back to the concentrator, to do a periodic data...

all my attempts to configure split tunneling for a vpn user (pix 515) do not work.can some one please tell me why?I have configured the vpn user with the vpn wizard at the pix pdm , I have marked the checkbox for split tunnel. this is the config: ...

Hello,Just purchased two brand new 506E units, and both get extremely hot while running with no actual load. Is this normal? It seems to be the hotest right above the CPU. My older 506 unit does not get nearly as hot. I am just concerned that they mi...

Below is the custom signature I created to catch rogue smtp engines on my network. Many of the alarm does not have DST/SRC ports or IP's. About ten % of the alarms have correct information. Am I missing something in my custom sig? After applying...

I get a 'Remoter peer is no longer responding' error message when trying to connect to a VPN 3000 concentrator. I have to connect in to network with PCanywhere to 'reset' or 're-boot' the VPN 3000 Concentrator each morning to clear up this problem....

I have a large network (500+) of remote sites on a non multicast public platform. I now have to support multicast traffic for my users and have thought that multipoint tunnels set up as an overlay on the current platform will do the trick. At the mo...

Hi,I have put the relay in DMZ and I would like to configure the relay in DMZ to work with Exchange Server in Internal Network . My PIX is 2600 .Thanks in advance . And I appreciate your cooperation . Adnan .

I need a FireWall with Secure one LAN , one WAN UTP and three DMZ support.With a failover/hot standy capabilities. Can any one help me decide on this. I need to recommend a Fire Wall load Balancer also , does Cisco has one??The help will be highly ap...

Hi!Can anybody clarify whether CatOS 7.5 supports IDSM-2 or not ?In the CatOS 7.5 Release Notes I see WS-X6381-IDS only.WS-SVC-IDS2BUNK9 is not mentioned there.Oleg Tipisov,REDCENTER,Moscow

Anyone here use VMS for vpn&security management? just seeing what people use for this