Hi,I would like to know that ACL processing in Cisco 3845 is hardware based or software based?May I have a list of hardware that support dedicated ASIC for ACL processing?Thanks and Regards,Ahmed Shahzad.
Is it possible to configure NAS (on NAM perhaps) to assign IP addresses to clients on the trusted side - i. e. to act as a DHCP server for the trusted side subnets or change the address through the NAC Agent after the posture assessment is over?
I have configured MAB (MAC Authentication Bypass) with MDA (Multi Domain Access). All devices are successfully authenticating with their respective VLAN. MAB devices got authenticating as Voice.I am using ACS (Radius) for authentication and DHCP rela...
Long story short, we are having a problem with someone call 911 and hanging up. I have our VoIP gateway (2821) set up inside of MARS (v6). I can see when someone dials 911 (%ISDN-6-CONNECT: Interface Serial0/2/0:22 is now connected to 911 N/A) but ...
With a 5510, I see that it takes either a CSC or a AIP module. Can the 5510 be configured to do both contect filtering and intrusion detection? If so, which 5510 model (ie asa5510-aip10-k9 for example) should I get to do csc and id for around 150 use...
Dear Sir/Madam, Good day to you. Beforehand, I really appreciate you because of spending your time to read this post.I am MSc Networking Professional student in UK. I am doing my dissertation which is related to the NAT-PT and IPv6.It is about 4 day...
I am running v4.3.6 (2841) below is the output from the command pnexp> export all.I can see that I am connecting on the SFTP server (in the logs) and I am creating the folder as expected but there is nothing being sent. I have R/W permissions on the...
We have implemented a dot1x secured network with 3750 switches, MAB is configured for HP printers.This works well, but we recently shut down the network core switches and when the core switches were brought back up,the printers stay offline, they hav...
We have a sharepoint server that I want to make accessible from the internet. The server is part of an active directory domain. It is located at the corporate office and is accessible by the plants through a vpn. The outside sales force wants to b...
We are deploying a OOB VGW NAC solution (4.7.2) and I have SSO working with the Unauthenticateed Role.When I look at the online users all of them are:WindowsADServerUnauthenticated RoleBut function as I would hope.I also have an employee role that we...
We are running NAC 4.7.2 in a OOB VGW configuration. Let's say the mapping is from untrusted vlan 630 to trusted vlan 30 and that I have device that has failed it's posture check and needs to remediate to an external website. (The device that has fai...
I am looking for the New Case and View Case buttons in my Mars. The book shows these in version 4.2, but I have version 6.x. Page 137 inSecurity Monitoring with Cisco Security MARS, Threat Mitigation system deployment, Chapter 6.
HI,I am using latest CAM 4.7.2 and same CAS versiion .Can anyone suggest a link to command reference for 4.7.2 .Only a few commands are found in the config guidesAlways using the GUI is not very helpful.regardsRaj
Hello ,I am just confused about the guest access. Should I make separate vlan for the guest access? How can the guest, access only the internet site?thank you
Does Cisco Security Manager 4.x and Cisco Secure Access Control Server 5.x integrated role based administration has fine-grained control for devices? E.g.,* User-a can only manage policy-a for device-a* User-b can only manage policy-b for device-b
