Hi,can some one tell me how many Site-to-Site VPN tunnels can be made using 1841 (Cisco1841-sec/k9) ROUTER.Thanks
Hi,can some one tell me how many Site-to-Site VPN tunnels can be made using 1841 (Cisco1841-sec/k9) ROUTER.Thanks
Can anyone tell if in the country of India the following items are support: IPSEC, Triple DES, AES, and TLS 2.0? Where is the information located on Cisco website?
Hi, everyoneI have a question about CAR on router. The router have a G703 E1 WAn interface and an ethernet interface. My goal is to rate-limiting access-rate of every ip address under ethernet, that is, for example, every PC under the ethernet interf...
I am having a small issue with our Clean Access Manager blocking any Windows XP computer that has service pack 3 installed. The main failure it is giving in the reports is thisFailed Checks:pc_Windows-XP-SP2, Registry Check [\HKEY_LOCAL_MACHINE\SOFT...
Hi,What is the difference between ACE appliance and the new ACE web based application firewall appliance? Is it different appliances? Also what is the best scenario to combine the two appliances in the same network?Thanks
Hi All, Can anyone help me to understand the below access-list access-list zzz permit ip host yy.xx.224.0 host 255.255.252.0 Thanks Regards Anantha Subramanian Natarajan
Hello, all!Dear colleagues, I run into following situation:I try to set Query/Report with Query Type set to "Destination IPsranked by Bytes Transmitted".When I press Query or Submit Inline I got necessary data followed by"Total Bytes Transmitted" (al...
For some reason, these ports are open on one of our 4500. We don't control the WAN here, and this switch is hooked to the router. Any ideas why these are open?udp 0 0 *.2347 udp 0 0 *.2345 udp ...
When a user connects to our PIX 506E they are able to access the internal network. but cannot access the internet. they appear to be going through our internal ISA server. I have split tunnel turned on. On the client I right click icon in task ba...
We are experiencing an interesting little problem with failover. Whilst performing some testing we discovered that when the Secondary Unit is Active, and the Primary unit is powered up, the primary unit will disrupt traffic flowing over the Secondar...
Hi experts,i have configured a Cisco 857-k9 for remote vpn clients. all is working fine. but i have one question, is it possible on this 857 router to let my remote clients to start an RDP session with a server ?thanks & regards
Hi!:I am installing MC CSA 5.2 with a remote SQL database. I received a error about database collation. I have a database with a collation which isn't Latn1_General_CP1_CI_AS and I want to use because I have another database.Is it possible install MC...
I have a Win2K3 RRAS server behind a 2801 router. The server is statically NATted and GRE and port 1723 are allowed via the external ACL.I thought this was just a Windows error, but the error I get when clients try to connect led me to post this her...
I have pix 525 with 8.03 ios and adsm 6 installed.remote vpn configured fine, cisco vpn client installed fine.but after the connection, I can't access any hosts outside of 10.0.0.x(inside) subnet.I can't even ping my outside NIC 129.2.28.100anyideas?...
Hello,I have 2 DSL routers setup with a VPN tunnel between them. The VPN works fine. Before setting up the tunnel, I had telnet/SSH access. However, when I apply the crypto map to the Dialer interface, I lose the ability to telnet/SSH to the route...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
Subject | Author | Posted |
---|---|---|
04-05-2024 11:31 AM | ||
03-26-2024 01:41 AM | ||
03-14-2024 11:57 PM | ||
02-28-2024 12:11 PM | ||
02-27-2024 07:31 AM |