I do not know if this is the proper forum however I need to know can MARS capture Instant Messaging information?
I do not know if this is the proper forum however I need to know can MARS capture Instant Messaging information?
I am trying to learn how the Cisco NAC appliances work. I have created a small self-contained test network with a Server 2003 domain controller, a fake domain setup and some workstations joined to the domain.I have two NAC appliances, one is the Ser...
Hi,I'm currently trying to upgrade our cisco vpn3000 to the latest software using the web console and it continually fails with the error :Software Update ErrorAn error occured while updating the image, VPN 3000 Concentrator has not been successfully...
I'm trying to get a service-policy setup that rate-limits the http traffic our users are creating by surfing the net. In our case, our asa actually sits with our ISP, so I'm trying to cut down on the bandwidth costs the http traffic is taking up fro...
HiI had to switch off port scan shunning for possible offenders becaus I got this errorLU allocate connection failedAlthough there is only 191Mb used from 256MbIt is a ASA 5510 Sec Plus.Is there anything else I can try ? I mean the CPU was only @ 2% ...
I use the GRE tunnel (with keepalive)and IPSEc at ISR 2821 with AIM-VPN/EPII-PLUS.And also I use QoS for various traffic.service-policy output command is applied to the tunnel interface.And I can classify those traffic and shape the bandwidth.When W...
I can successfully connect to my ASA using CSD and I can also map drives. However, I do not see any files that should be in the share. I try to create a new folder, which is allows, but it does not show in the folder on the local computer. Name re...
What is the preferred method to keep a l2l tunnel up between a 3030 concentrator and a asa 5505? Is just sending pings through the tunnel enough or are there keepalives I can configure?
Please how exactly can a rate-limit the amount of bandwidth that a client router can have access to on my network from the clients router? can i get a configration specimen?
How do I know what level my asa5505 encryption is set at?
I'm having trouble uninstalling CSA off of one of my servers. When I uninstall I get errors (see attachments). I have tried to disable csa before I start the uninstall and have put it in test mode. Any other ideas or has anyone else ran into this?...
We have a security requirement to obtain the hostname of machines connecting through our vpn devices. With logging on the local vpn client set to high I see it does log the systems' hostname (below.) Is it possible to capture this into my AAA servers...
Hi,I have a ASA firewall with outside interface connected to Internet.Public IPs are allowed to access Web server behind the firewall by redirecting it.Everything works fine. But I would like to translate public(sources) IPs (not VIP for web server) ...
I have a user that is trying to establish a VPN tunnel using an AT & T Global dialer. I configured on the ASA 5510 3 ACL's access-list outside extended permit tcp 192.9.X.X 255.255.255.255 eq 50 anyaccess-list outside extended permit udp 192.9.X.X 2...
I'm setting up ASA5540 to replace PIX525. I have a problem, traffic is not flowing from the DMZ to Outside interface. I enabled ping from the outside interface to dmz and debugged icmp trace. This is what i found, "ICMP echo request untranslating Out...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
02-16-2025 07:17 AM | ||
02-10-2025 06:12 AM | ||
12-03-2024 10:16 AM | ||
09-04-2024 12:11 AM | ||
08-14-2024 02:32 AM |