I am a beginner OF ASA. I found that I can't access DMZ from Internal segement. Anyone can give me an hint?I attach my config
I am a beginner OF ASA. I found that I can't access DMZ from Internal segement. Anyone can give me an hint?I attach my config
I can load and connect to our server using the Cisco VPN client and I can send data to the server, however, nothing can come back, which I believe is a Vista or Trend Firewall issue. Any thoughts would be helpful
I have a VPN client that connects at one site but not the other. Heres the scenario.We have 5 static IPs from ISP provider which is sent to cable modem. IPs assigned as follows. Cable Modem - 4 ports (pass all, 5 static IPs) Network A outside (port1)...
I have pix525 with ASA8 with ADSM6 behind layer 2(transparent mode) firewall.I've configured Remote access VPN on this thing and I can connect from home(with NAT-T disabled)all the ip address are public ip except the client from home which go through...
What I want to accomplish is to have all the IDS in my network report to CS-MARS but only limit its view of reports to a specific group only and not be viewable to all groups. Is that possible?
I just want to confirm the date that our MARS100 series systems running 4.x will stop receiving updates. For example when will we no longer receive updates to handle new Checkpoint, AV or ISS events sent to it? Thanks
Can anyone share their experiences with Cisco Secure Desktop and SSL VPNs on the ASA 5510? The Cisco Secure Desktop runs too slow to be usable. Has anyone else had this problem?Also, any tips for securely deploying a SSL VPN would be appreciated.Th...
Rumor was that MARS can email XML notifications which identify the reporting device and perhaps even the raw event. True?If not, does someone know if MARS will be adding something like this? Thanks.
What is the command to show date on the AS/5300?Thanks.Diane
Hello,I have a problem with IP Source Guard on a Catalyst 3750 switch running 12.2.40SE IOS.I've configured port-security, DHCP Snooping and DAI and they all work as expected.However when it comes to IP Source Guard, things don't work as I expected.....
Please help me to finding the best solution to issue MSSP in my company. All security devices are Juniper...Thanks
I have DAP configured to run a Basic Host Scan for incoming SSL VPN users. I'd like to record some of the info that its collecting, either via RADIUS accounting up to ACS or via Syslog to MARS.I'm specifically interesting in recording endpoint.dev...
i have multiple access list to apply to various interfaces - however, I want to nest the access together. Is that function possible within ASA platform?
all sample config ive seen for FWSM interswitch failover config shows using 3 interfaces in port channel mode...any reason why this is usually 3?
Need configuration assistance on 6509: Goal is to block inbound traffic on interface except from 10.60.0.0 and 10.90.0.0This is what I have but is not working - what am I missing6509interface vlan xxip access-group 100 in!ip access-list standard 100p...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
05-22-2025 03:30 PM | ||
04-09-2025 12:34 PM | ||
04-09-2025 04:10 AM | ||
04-09-2025 04:03 AM | ||
03-27-2025 12:33 PM |