Other Security Subjects

What are the alternative methods for establishing inter vlan communincation on PIX/ASA other than defining SVI?

When configuring a crypto map configuration, I wanted a bit of a clarification on what exactly the match address command does.Which is it?A) Match address command is used to determine what traffic is "interesting" only when it comes to tunnel establi...

I am looking for an ACL I can put on my edge router to deny ICMP and telnet to my WAN port. The network has an internal firewall that is protecting the network but I think I should also deny access to my router from the outside. thanks in advance

Oficially MARS only supports ScreenOS 4.0 and 5.0.Anybody tested MARS with ScreenOS 6.0?I'm asking this because I'm starting to configure a solution with 2 levels of firewalls and one of the firewalls is an SSG140 coming with ScreenOS 5.4.0 from fact...

I don't know if I'm asking this right because my searches result in no help. I'm connected to my work via VPN. I remember that there is someway to type something in the url bar to access the servers. Something like \\servername\sharename. I don't kno...

Dear guysi want have three edge routers that connect headquarters to my remote offices.i want to log and track users who user edge routers.please give me hintregards

Hallo,we are planning a scaling DMVPN network for around 2000 spokes. Is it possible to install the HUB's behind a Load Balancer so that they are reachable only through 1 VIP address and ALSO the possibility of a direkt spoke-spoke communication when...

Is there a way to turn the security level to off through the MC. I believe if you are an admin this should be an option.

I have a 2611 running IOS 12.3 configured as a NAT router. I need to allow external PPTP VPN clients to connect to a MS Win 2003 server running RRAS on my inside network. I have configured static nat to forward TCP port 1723 traffic from the router...

I have attached CBAC configuration ,to correct this answer is ip inspect voice out need to configured on fa0/1.As i know inspect rule always need to be configured on LAN side IN direction .Can someone guide me when it need to be configured IN/OUT and...

Hey. We have an Pix 525 as our main applicance. With satellite sites running Pix 506e. All communications are tunneled thru a 3725 router. We we lost communications due to power failure and when we checked configs we found that three of our devic...

Tried so many things I'm completely lost now and need fresh eyes on the problem. I can post the ASA config and debug log. The other end device can't print out a config (custom Unix box) so ask questions if needed.here is the relevant info.access-list...

I have a problem with ASDM spawning errors and losing session authentications after (successful) connections are made. The problems arose in association with creation of site-to-site VPN using the "Wizard".I initiated a case with TAC, and they told ...

Dear sir, we need with CSC-SMM10 module which supports 500 usersAntiX and Anti Spam on asa5510plz mention 500 users means its a 500 concurent users or how the firewall will take ,through macid or some thing else.plz give the clarification on 500 user...

Hey guys,when I access a router or a switch (I dont' remember if it does it in firewalls as well) via the light-blue console cable, I have to restart the device. I use Hyper Terminal from windows and I get this problem a lot because if I want to acce...