Other Security Subjects

Hi,Im running a ASA5520 with 7.0(6).In my setup i have all my 8 subinterfaces /dmz's (incl. outside) running same sec.level because i just want to control security with my ACLs and it works just fine, no problem there + dont want lots of statics and ...

My system is returning a runtime error number 438 (object does not support this property or method.)when I try to lanch CCA. The login window never appears, rather this error. System is runing windows xp service pack 2. The system is runnig an amd tu...

Can we crack a level 5 password of cisco IOS ?All inputs are welcome.RegdsChintu

I have been asked if it is possible to do something unusual with a range of IP Addresses.The request is for a range of addresses that, when used as destinations, all end up using a single IP as a destination. Sort of a backwards NAT.So if I send a re...

Hello,I have two 3005 concentrators running in parallel and configured for load balancing. Everything works fine. However, when testing the redundancy of this setup by disconnecting the 3005 controlling the client session, the client does not try to ...

I have an ASA5510 and I am trying to set up a DMZ. Right now I am trying to have inside clients ping a host on DMZ it but with no luck. Any ideas? Here is the config:interface Ethernet0/0 description OUTSIDE nameif outside security-level 0 ip address...

Has anyone successfully managed to run Netbios over a LAN to LAN tunnel where NAT is being used ie such as where the netowrks at either end of the tunnel have overlapping addresses.Al other protocols work but udp 137 and 138 are not being natted.ASA...

Hello!I have the following architecture:[webclient] -HTTPS- [CSS+SSL] -HTTP- [Server]I need to authenticate user by certificate on Server (Oracle Application Server 10g). I've configured CSS to request user certificate and insert fields in http heade...

Hi all, I use Catalyst 6513 with a module FWSM. I install more policy on FWSM but I can't do. I don't know why. When I install policy, I see a sentence: Direct failover lan unit [primary or secondary] command will be ignored because MC control only ...

I Want to know if this feature will be support for other platform such 18xx, 17xx, 28xx and other.I want to built redundant firewall solution with 18xx router

I'm trying to set the number retries on a DHCP enabled interface in PIX 7.21 and the retry command isn't there. How do I get around this?Thanks

I have a web and ftp server behing an 837 router.I have three access-list statements:access-list 120 permit tcp any host 100.x.x.x eq wwwaccess-list 120 permit tcp any host 10.x.x.x eq ftp-dataaccess-list 120 permit tcp any host 100.x.x.x eq ftpWhen ...

Hi,I have run into problems configuring static nat on a ASA5510-K8 running software version 7.0(6).Hope I can solve it with a little help from the experts in here.I have a public subnet available.First IP is in use by the routerSecond IP is used for ...