Other Security Subjects

The small company hosts multiple secure web sites (HTTPS). The ISP assigns all public IP addresses to one server with a private IP without blocking any ports (ISP manages the router). They programmed the server point each public IP address to a diff...

Does the FWSM provide URL logging capabilities? I need to log employee access to external websites and was hoping that the FWSM provides that unctionality. I know it filters but I need logging capabilities as well? If so, how would I configure this...

can we map multiple global ipto single ip for http access without using differnt ports i.e.,with out static PAT

how to map the set of IP to a single internal one is this ok access-list outside extended permit tcp any 213.31.195.195 255.255.255.251 eq www static (WebServers,outside) 213.31.195.195 10.80.201.9 netmask 255.255.255.255

i am two pix 525 firewalls with two interfaces e0,e1 each.failover cable connected primary & secondary .failover & primary firewall need one more port for stateful connection.the standy pix can't ping to primary.

what does a passive ftp entry on firewall mean. pls explain.

I have a requirement for smaller offices using PIX 501's for general internet access to report badwidth usage. I came across some information on using Netflow and I am curious if this or a similar feature set is available on the PIX? Specifically I...

It is easy to see when you have maxed out your bandwidth. Sometimes it is a few users.Is there a way to see individual user bandwidth usage on a PIX?

Hi, i have a 128/256kb VSAT connection, with IDU -> Dlink swith -> Pix 501 -> rou.2621xmwhen i download files (especially very large files) the rate reduces to about 4kbps. Is there anything i can do on the Pix and/or router to...

Is there a way to get the concentrator to assign the client a tunnel address that will not clash/overlap with the address/netmask that the client gets from the hotel or his/her SOHO NAT router?I cannot predict the address/netmask the client will rece...

I currently am integrating Websense Enterprise for IOS into my infrastructure. The filtering is working normally but I find that outside of the exclusive domains I have configured there is no caching occurring. I did a debug and found out like this t...

On router there is a simple access list configured:Router01#sh run int vlan51Building configuration...Current configuration : 250 bytes!interface Vlan51 description Storage management ip address 141.x.x.x.255.255.240 ip access-group Vlan51-Storage-In...

Dear expert,When we turn on the syslog, we see a lot of messages as "%PIX-1-106021: Deny UDP reverse path check from 192.168.0.208 to 10.17.18.150 on interface inside". Is there any explanation for this ?

Dear Expert,When check on Firewall interface, we see a lot of Dropped VLAN untagged packets as attached.Is there any specific reason why this happen ? We have check cabling, port speed, and VLAN consistency and everything good.