Hi All I entered the wrong name so there was duplicate nameexample :first name : andi saputralast name : andi saputraso for my certificate have duplicate name andi saputra andi saputra how to fix the name so that there are no more duplicates. so that...
Forum Posts
As a general rule of thumb I recommend enterprise endpoints use private IP addressing and use a hide nat. I have encountered an organization which uses publically routeable IP addresses for their desktops. In addition they allow (upon request) inboun...
Is the SAFE white papers the best source of information in preparation for the CCIE Security written test?
Resolved! My acces-list doesn't work !!!
Hello everybody,I have a problem with my access-list.I have a simple topology like you can see on the picture, I'm using OSPF for routing and all seems good, So I'm able to ping the TOOLBOX (which supposed to be the WEBSERVER) from my WEBTERM (docker...
Hello, I am trying to configure Port Based ACLs in Switch C2960X having IOS release 15.0(2)EX. But i get error every time while applying ACL on the physical interface "Port Based ACL are not supportive with this image".Can anyone help me how can i re...
I'm just starting to use object-groups to tidy up some of my ACL's on a router.Is there any particular reason why you can't use the following:permit tcp object-group network A object-group service A object-group network B object-group service B ?
Where can I find the MTBF of the ASA 5505 & ASA 5515?
Hello I have a Cisco ASA 5550 running the software version of 9.1.7.29. The SNMP groups currently have v1 and v2c configured. I would like to change it to v3. I know how to change the SNMP version in the Solar winds but I do not know how to change ...
Hello All, Device: ISR4321 IOS-XE: 3.16.5.S I have an access-list for our Guest Wi-Fi on the ISR that I now need to give access to our internal DNS Servers, because the ISE Server's hostname needs to be resolved for the Captive Guest Portal redir...
Hi everyone, This is my first post in cisco community! I have a problem with na ISP. A host on my network sends huge amounts of data to an IP on a remote location outside my company. The ISP is requesting me to solve this issue as it's been tagg...
I've been having loads of problems connecting to and logging int the learning network, especially the store when logging in. I believe its sue to this https://blog.qualys.com/ssllabs/2017/09/26/google-and-mozilla-deprecating-existing-symantec-certi...
Dear Cisco Experts, We have a bit unusual task - need to allow RDP access from PC outside one ASA to PC outside another ASA via inside network. See attached drawing. For the moment I'm able to establish RDP sessions to/from test machine as shown by g...
Hello I am Performing a software upgrade on a Cisco ASA running 8.0 to 9.1. I know that the major change is the NAT configuration in this upgrade. In the Pre 8.3 Version, below is the static NAT config. Here any traffic comes on the inside inte...
When configuring multiple vpn peers on the same crypto map and seq-num on a PIX....Ex...crypto map mymap 10 ipsec-isakmpcrypto map mymap 10 match address 101crypto map mymap 10 set transform-set mysetcrypto map mymap 10 set peer 10.0.0.1crypto map m...
Hello Experts, I currently have an environment that has SNMPV2c for my mds9148. mds9250, and mds9513's. If I show the running config. I see snmp-server host (i.p) and then traps version 2c public udp-port xxxx. I have gotten an email from the net...
