I continue to receive this error from my pix 515e:NTP daemon interface inside: Packet denied from 0.0.0.0I have 2 ntp server on my inside lan, and my pix sync the time correctly with they.Any idea?Thx.
please candid help on this, i'm actually using a 1720 router for practice and have to erase the flash for another practice. but unfirtunately he bring an error message that Load prog: bad file magic number 0X0. boot: cannot load flash.he keep on goin...
Below is my current configuration.2 x IDS 4230FE IDS SensorIDS Software Version 3.1(5)CSPM 2.3.5iI need to upgrade my IDS Sensor to Version 4.1 to have continue support on signature.What license or product should I buy?Do I need to just upgrade the C...
Hello. I want to put our Cisco 3005 concentrator behind a Watchguard Firebox 700 firewall - can anybody give any help or advice with this? Particularly, which ports will I need to unlock to allow vpn tunnelling to continue?Thanks for looking at this...
I attempted to upgrade from 4.1.3S86 to 4.1.4s91. Ran through the ftp process with no errors. an hour later the telnet session was still at same spot. I restarted the IDS after failed attempts to log back on. When I log on as cisco it logs in and...
Hi,I have the situation where I'm trying to create an outbound rule but PDM changes the interface to point to an interface with a higher security level. Testing it I found that it then allows access to the higher security interface.Please HELP!
I have been trying to set up dmvpn with the hub behind a nat'ing pix firewall. The setup works fine until I put in the firewall and then it dies. I have the tunnel up but the hub cannot send traffic back to the spoke. The pix has passthru for esp ...
My 4210 has been updating fine (automatically) via our local FTP site when I put the updated signatures in the corresponding directory. It now appears to have a problem with S100. It logs in fine, but does not download the file. Was wondering if i...
Let me first say that I have never worked with this product. However, I am scheduled to do an upgrade for a customer. From what I read going from 3.x to 4.x is a distructive upgrade. Is there anyway to save the existing 3.x configuration and re-apply...
Hello,we try to identify vpn client users by their certificates by checking the certificate's serial number on the vpn concentrator. That for I have set up a rule in the Group Matching Tab. When I use the "Organisation"-field (O="Organisation") every...
When configuring access lists, how does one know the order in which access lists will be applied? For instance, if there is an access list on the interface, and access list specifying interesting traffic for VPN purposes, and an access list for NAT p...
I want to ping from a host on the outside to a host on the DMZ and at the same time be able to ping from the DMZ to the inside. I can only ping from DMZ to inside after creating the following static and access-list commandsstatic (DMZ,outside) 10.1.1...
I have IDS 4210, show version appears like this:IDS# sh verApplication Partition:Cisco Systems Intrusion Detection Sensor, Version 4.0(1)S37OS Version 2.4.18-5smpbigphysPlatform: IDS-4210Using 257458176 out of 261312512 bytes of available memory (98%...
