Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi We are running webvpn with default group now. How to use WEBVPN with 3015 concentrator internal group or external group with Cisco ACS RADIUS?Thanksben
Hi guys: I have few basic questions regarding IDS.Hope someone can give help me out. 1.Does any version of IDS have SNMP Support. 2.Is there any major difference in configuring 4230 and others like 4235 ,..latest ones ?Thanks a lot
I have a 501 and 506E, with an inside address of 192.168.1.1. (255.255.255.0) The external is say 10.0.0.254 (255.255.255.0). When any requests go to 10.0.0.254, I need to NAT to 192.168.1.20. I only need 25, 80 ,443, and 3389 to come in. I have used...
Hello all,I'm running cspm 2.3.3i on a windows nt server and whenever i try to save and update it crashes without applying the changes i made. I get a message saying Cfmi.exe has generated errors"any ideas??thanks all
Pix has PPPoE single Ip...on the out side ....I need to port map smtp from that IP to an inside IP of 10.0.0.7....is it possible with PPPoE ? and how?I am at 6.3 with 3.0 PDM
I want to setup IDS to shun using a Firewall Service module. However, I am unable to get the IDS device to communicate with it. When I do a show statistics networkAccess, it shows that ids is connecting, but never goes into a state of active. I add...
Does anyone know if the following services are turned off by default on current IOS realease?:udp-small-servertcp-small-serverip bootp serverservice fingerThanks,---Mike
I just installed a PIX515 and configured it to support our existing T1 internet connection. We now have an additional internet connection(DSL). Clients all have same gateway. How can I route traffic from specific client ip schemes (172.16.10.*) to us...
Using IDS Sensor version 3.x, one could configure a Router's syslog to point to a Sensor, and configure the Sensor to treat Router ACL violations from syslog as Events and report them to CSPM.Now that Sensor ver 3.x and CSPM are end-of-life, we are u...
I have 2 sensors, they were initially configured in the wrong MC and two SecMon's. I deleted the devices from all MC's and SecMon's and regenerated the TLS key. I cannot get the devices to establish a TLS connection now. They are configured by my ...
Came in this morning to find no events showing in IEV. Checked the database screen and it shows zero events in the event_realtime_table but shows the table size as 5682680.How can you have over 5MB in the table but no events?I've corrected this probl...
Is it possible to allow multiple PPTP connections through PAT on a Cisco router? If no (which is what I assume), is there a product out there that can do this?Thanks!Jeremy
Hey all,I have had a pix 515E prevent traffic outbound twice in the last 18 hours. Once I restart the firewall, all is well again. The pix is running 6.3.3 OS.My question is geared more towards trying to figure out why it is doing so. What would be s...
Currently im testing fail over between two 3000series concentrators in our lab. I have succesfully been able VPN to either concentrators seperatly but cant VPN using the Clustered address. Here is my setup3015 concentrator3060 concentratorSBC Static ...
