Other Security Subjects

Hithe first step to migrating virtual to physical FMC is to ID the versions for the Supported Migration Paths. how do I find the version on the virtual?Thanks 

hello ,I am configuring remote access vpn with saml authentication and in the final step im asked to generate the METADATA file from the FTD cli but the command is not working (show saml metadata "name") can anyone help me ? 

Dear all,I want to know the difference between "conduit" and "access-lists".When I want to protect packet from outside to inside,what do you recommend to me? conduit or access-lists?Thanks advance,Willy Seo

I confirmed that it is configurable in IOS, but there seems to be no command in Nexus. Is there a command that does the same thing? Or does it not support finger service? If you have any relevant documents, I would appreciate it if you could provide ...

Hi I am a government contractor and support the department of the navy and I am being asked to supply letters of volatility for the following items:* Cisco - 8832NR  (VoIP Speaker Phone)* Cisco - BE6000M - Cisco Sphere* Cisco - BEGM-MS-K9 (VoIP)Does ...

I have three FTD firewalls setup. Two in high availablitiy mode for our data center and a standalone for our office space which is in a different location. The locations are connected via VPLS. All the firewalls have the same subnets on them and are ...

Hi All,Greeting!I'm trying to test out the CoPP violation on C9600 switch.By this guide, https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9600/softwasimire/release/16-11/configuration_guide/sec/b_1611_sec_9600_cg/b_1611_sec_9600_cg_chapter_...

First of all here is the systems info:#do show version Wed Dec 21 04:05:27.344 UTC Cisco IOS XR Software, Version 7.4.16 Copyright (c) 2013-2021 by Cisco Systems, Inc. Build Information: Built By : ingunawa Built On : Mon Nov 29 03:56:27 P...

I have done all group exams and the final exam with over 70%. I have not done the final exam practice, the certification practice and the skill assessment.               Is what I have done enough or will I have to do the other 3? 

Good Morning,I have two servers, one for http/https (LoadBalancerHost) and one for FTP (WizFTPHost) and am attempting to NAT them to the same public IP address, on an ASA-5516X.The following NAT configuration works fine, i can access both hosts on th...

We have Cisco Meeting Servers and have upgraded to version 3.6.  Since upgrading I am unable to get a credentialed scan of the servers with Tenable Security Center.  I know I am using the correct credential for the scan.   Any insights would be appre...

System: (note this is a vXR image applied to a white box, not a 9K)  Cisco IOS XR Software, Version 7.4.16 Copyright (c) 2013-2021 by Cisco Systems, Inc. Build Information: Built By : ingunawa Built On : Mon Nov 29 03:56:27 PST 2021 Built Host : iox...